T-Brick Mini 2.0 | Portable Titanium Wood Stove for Solo Hot Tent Camping | Zpoint New Arrival
-
Detail
Small but More Powerful
This is T-Brick Mini 2.0New air intake side panel
New air intake baseplate
Overall 1mm thickness pure titanium
New titanium spark arrestor
Titanium detachable baffle
Adjustable and detachable damper
Reinforced structure top cover
Free switching side panels
Unique octagonal glass side panel
Strengthening stove body
Hollow whole plate folding stove legs
New ultralight titanium spark arrestor
Comes with wind rope fixing ring
Overall TA1 1mm thickness pure titanium
Baffle and Inner panel of intake side panel (0.6mm)
New air intake side panel and baseplate
Maximum combustion efficiency
Three-Dimensional strengthening whole stove body
Enhance the rigidity of the stove and minimize deformation
Hollow whole laser cutting plate folding stove legs
Non touch welding structure, enhance stability
Titanium detachable baffle
Increase the maximum heat output of stove
Surface polishing treatment
Improves fatigue resistance of metal
Octagonal glass side panel
Observe the burning situation
Adjustable and detachable damper
Control the intensity of the wood burning
Adjustable sliding air intake Control
Control wood burning rate
Folding and panel design
CHART Stove Type Portable Solo Titanium Stove Carrying Weight(With 3m stovepipe) 6.9 lb / 3.1 kg Folding Dimension 12.6 x 7.7 x 3.2 in (32 x 19.5 x 8 cm) Firebox Dimension 12.6 x 7.7 x 5.9 in (32 x 19.5 x 15 cm) Assembly Dimension 12.6 x 7.7 x 9.5 in (32 x 19.5 x 24 cm) Side Glass Size 9 x 3 in (23 x 7.5 cm) Pipe Length (Storage) 9.5 in / 24 cm Pipe Length 6.56ft / 2m or 9.84ft / 3m Pipe Diameter 2.36 in / 6 cm Spark Arrestor Yes Material 1mm Thickness Titanium (GR1/TA1) Firebox Volume 9.2L
WHAT'S INCLUDED:
T-Brick Mini 2.0
Titanium Chimney
Stove Bag
Smoke Damper
Spark Arrestor with 3 Rings
Cut Resistant Gloves
Detachable Baffle
*Tools (titanium screw and wrench)
NEW BASEPLATE with AIR INTAKE
Increase the intake air volume of the firebox.Make the firewood at the rear burn more fully to prevent the glass from blackening.
SPARK ARRESTOR
40g / 1.4oz Ultralight spark arrestor, Sandblasted surface treatment.
Three detachable rings for wind ropes fixing.
Reduce the hollow area, the convex is good for catching sparks.
NEW STOVE TOP COVER
The three-dimensional hollowed-out reinforced plate minimizes the deformation of the top cover.
Reduce the direct contact between the flame and the top central area to avoid local high temperature and local low temperature, resulting in uneven heating of the top cover.
After testing, the reinforcing plate can not only strengthen the top cover, but also maximize the heating range of the top cover.
Tips: The stove must be fixed with guy-lines during burning, if the chimney is not fixed, the chimney will sway from side to side, which will cause the top cover of the stove to rise and fall continuously, which will eventually cause the top cover to warping.
DETACHABLE BAFFLE
The detachable baffle can maximize the burning heat efficiency of the wood. The air enters the stove through the side air intake panel, which can allow the smoke generated by the burning wood to be reburnt, the heat can be concentrated inside the stove to increase the temperature of the stove. At the same time, there will be less smoke from burning wood.
NEW REINFORCED BASEPLATE with AIRE INTAKE
Under the condition of ensuring light weight and portability, T-Brick Mini 2.0 adopts a double-row three-dimensional reinforced bottom plate. The 25 welding points minimize the deformation of the furnace after burning. 12 hollow octagons can enhance the heat dissipation effect.
After the stove has been burned for many times, the bottom of the firebox will be partially warped (Caused by thermal expansion and contraction), but under the action of the external reinforced plate, the whole firebox is still in a state of no deformation, which is convenient for the next installation and use.
NEW FOLDING LEGS
T-BRICK legs are made of a whole piece of titanium plate, which has a stronger bearing structure.
The raised design in the middle of the stove legs are suitable for uneven ground.
NEW AIR INTAKE SIDE PANELS
Compared with the T1 series, the side panels of T-BRICK can be switched freely.
Inside the tent, we can face the glass side panel and observe the burning of the wood.
The glass side panel also provides light in your hot tent.
The new secondary intake side panels have been redesigned to be stronger and less deformable after burning.
STOVE DOOR / TAIL PLATE
The door of the T-BRICK stove was widened and heightened so that large pieces of wood to enter the stove easily.
The edge of the door was 90-degree folded and 360-degree folded processing. The 90-degree edge can strengthen
the structure of the door frame, and the 360-degree folding can keep the door frame flat with the bottom of the stove.
We can use the ashes rake to remove the ashes after burning.
The reinforcing plate of the tail plate can ensure that the tail plate will not be deformed.
NEW TOP COVER LOCK CATCH
The lock catch on the T-BRICK Stove was designed so that side shelves can be used with it.
When used with the side shelves, it can also enhance the stability of the stove.
FRONT DOOR AIR INTAKE
T-Brick Mini 2.0 stove has a door with a slidable air intake and an octagonal glass, so that you can fine-tune the burn rate.
The area of the air intake was increased by 15%, which allows the stove to heat up the tent in a very short time in the cold winter.
STOVE BAG
The new designed stove bag is more durable, with YKK zipper, more portable.
